#Iei keypad gate hood code#

A programming mode (which can only be activated from within the Control Unit) allows authorized personnel to set the PIN and other functions (see Table 6-1) using the Keypad. A slide switch sets the lock output voltage (12V or 24V).

Installation and set-up are readily accomplished using the wiring diagram affixed to the inside of the enclosure 4 Figure 1-1, The CC-8421V2 Control Unit and keypad. The # button on the Keypad activates an annunciator in the Control Unit and also generates output signal for activating an external visible or audible device. The Keypad unit includes a green LED that illuminates when the lock is released. This greatly reduces the possibility of gaining access by guessing PIN codes, and is particularly effective when shorter PIN lengths are used. An invalid PIN penalty feature provides for ignoring all keypad entries for 5 to 60 seconds after an invalid digit is entered. The time duration during which the lock remains released after entry of the valid PIN is adjustable from 1 to 60 seconds.

Two 12V, 7AH sealed lead acid batteries (not included) can be housed within the Control Unit enclosure. The power supply includes a battery charging and monitoring circuit that automatically maintains batteries in a fully charged condition and activates audible and visual warnings when the charge level is low. It provides the voltages and currents required to reliably open standard locking devices including heavy duty locks such as Von Duprin* rim latch retraction units and Sargent & Greenleaf BRUTE* electric locks that require high in-rush currents. The system, pictured in Figure 1-1, includes a built-in 12VDC and 24VDC power supply to power electric strikes and magnetic locks, eliminating the need for a separate power supply unit. It can be used with virtually all magnetic locks and electric strikes and can be used to operate both a magnetic lock and an electric strike on the same door.

#Iei keypad gate hood code#

It provides reliable, secure keypad access control using a single 3, 4, 5 or 6-digit PIN code for all users. INTRODUCTION The Crypto-Lock Model CC-8421V2 is a versatile, easy installed and operated single door access control system.